FIBRE GLASS ROOFING (GRP)
Our Fibreglass Flat Roofing is robust and aesthetically pleasing to the eye. We can provide a non slip finish that is suitable for balcony’s or roofs that have foot traffic. The entire roof surface and edge detail are formed as one continuous membrane which bonds to the new roof deck, effectively encapsulating your flat roof in a monolithic skin which contains no joints. This is ideally suited to simple or complex roof designs with lots of protrusions, such as sky lights. A Lead roof look alike reproduction is also possible if required.
We create a five layer glass reinforced polyester membrane, applied in situ upon the deck area which is cold formed without the use of flames or heat. Our installation process ensures that every roof is constructed to stand the test of time. First, we normally strip the old roof back to the supporting structure which is often timber joists, and then form a new roof deck using 18mm thick tongue and grooved boards. Once re-decked, we apply fibreglass profiled trims to all edges of the roof to ensure nice smooth lines. The main deck area of the roof is covered using a liquid resin based system which is reinforced with fibreglass matt. We use a thicker fibreglass matt that exceeds the industry norm of 450gm, which gives a thicker and stronger layer with no joints. We then apply a finishing coat of tough protective polyester topcoat which can be specified in a colour of your choice.
We create a five layer glass reinforced polyester membrane, applied in situ upon the deck area which is cold formed without the use of flames or heat. Our installation process ensures that every roof is constructed to stand the test of time. First, we normally strip the old roof back to the supporting structure which is often timber joists, and then form a new roof deck using 18mm thick tongue and grooved boards. Once re-decked, we apply fibreglass profiled trims to all edges of the roof to ensure nice smooth lines. The main deck area of the roof is covered using a liquid resin based system which is reinforced with fibreglass matt. We use a thicker fibreglass matt that exceeds the industry norm of 450gm, which gives a thicker and stronger layer with no joints. We then apply a finishing coat of tough protective polyester topcoat which can be specified in a colour of your choice.